Item number: 10011094

Auna HI 450 PA Amplifier 450W Max 19" 2U

Strong PA amplifier with XLR, TRS and RCA inputs, PA outputs, and speaker terminals.
450 watts max. power at 8 ohms, 250W at 4 ohms and 650W power at 2 ohms.
Bridgeable 2- and 1-channel operation and option of 48cm (19 ") rack mounting with 2U.

The Auna HI 450 PA Amplifier combines uncompromising performance with extensive connectivity options and a harmonious design concept.
In terms of technical performance, the amplifier is equipped 450 watts of power (4 ohm). In addition to the regular operation, the amplifier may also be bridged in 1- and 2-channel operation to take advantage of all power reserves. The Auna HI 450 can then achieve an amazing 650 watts of power (at 2 ohms). The built-in fan cools the device, with vents that counteract excessive heat generation.
Incoming audio signals may be connected to the PA via XLR, TRS, and RCA inputs. PA speaker jacks and screw terminals further strengthen connections to different boxes. The LEDs on the front panel provide information on existing signals and show an alert in the case of clipping.
The housing of the Auna HI 450 PA amplifier impresses with its clean lines, silver front bezel, and black chassis. 48cm (19 ") rack installation with 2 units is also possible.

Product details

Highlights

  • PA amplifier with 450 watts max. power at 4 ohms at (250W into 8 ohms and 650W power at 2 ohms)
  • XLR, TRS and RCA inputs, as well as PA outputs and speaker terminals
  • Bridgeable with option of 1- and 2-channel operation
  • Black metal case with silver bezel and possibility for 48cm (19 ") rack mounting

Included

  • 1 x device
  • 1 x power cable
  • 1 x English user manual (other languages​​: German)

Dimensions

  • 48 x 9 x 48cm (WxHxD)
  • 2 HE
  • Weight: about 16kg

Features

  • Connections: 2 x XLR line input (balanced), 1 x 6.3mm jack line input (balanced), 1 x 6.3mm jack line input (asymmetric), 1 x stereo RCA line input (balanced), 2 x PA speaker output, 2 x set of speaker terminals
  • Frequency response: 20Hz - 20kHz (0.3dB +/-)
  • S / N Ratio: 100dB
  • Input sensitivity: 1.2 Vrms
  • Harmonic distortion: <0.1% (4 Ohm), <0.05% (8 Ohm)
  • Input impedance:> 20 kOhm
  • Volume control
  • Stereo / mono switch
  • Power LED
  • Signal LED
  • Clip LED
  • Cooling: fan
  • Safeguard
  • Stand feet
  • On / off switch on the front panel
  • Power supply: AC 220V, 50Hz

Operating instructions

What our customers think

Leave the first product review!

Small Image

Auna HI 450 PA Amplifier 450W Max 19" 2U

Highlights
  • 450 watts max. power at 4 ohms
  • XLR, TRS and RCA inputs, PA outputs, and speaker terminals
  • 48cm (19 ") rack mounting
€239.90 Incl. VAT
You can change your order at any time