Capital Sports

Racktor Half Rack

From 12 Customer
679,99 € 369,99 €
You save 45% Delivery time: 8 - 10 workdays
Top features
  • Massive construction made of steel square tube
  • Two adjustable J-Hooks & Safety Spotter
  • Four individually placeable weight intakes, including clamping spring
Shipping costs: from 0,00 €
The item is ready to ship and will be shipped immediately after receipt of payment.
Racktor Half Rack
679,99 € 369,99 €

You may change your order at any time.

Racktor Half Rack Barbell Station Steel Black

With the Half Rack Racktor from Capital Sports, make your home gym fit for extensive training with the barbell.

The sturdy construction made of steel square tubing with a wall diameter of 2.5mm can support most weight loads. The two J-Hooks and Safety Spotter allow for safe training adapted to your individual needs. With a simple movement, the J-Hooks and Spotters can be mounted or unmounted in the 35 available holes, enabling individual height adjustment in seconds. Both Safety Spotters are provided with thick rubber bumpers, which intercept bouncing barbells to lessen noise and prevent damage to the racks.

To round out the range of functions, the Racktor Half Rack from Capital Sports features an additional four intakes for the storage of weight plates. All intakes can be placed according to your own preferences, and feature a spring clip for secure attachment of the wheels and are suitable for weight plates with a bore diameter of 31mm. At the upper cross beam, there is also a chin-up bar with three different grip positions and widths.

User manual PDF
Product details

Top features:

  • Massive construction made of steel square tube

  • Two adjustable J-Hooks & Safety Spotter

  • Four individually placeable weight intakes, including clamping spring

  • Includes multigrip chin-up bar

Properties:
  • Simple plug-in system for quick height adjustment of J-Hooks and safety spotters
  • Safety Spotter with bumpers made of rubber to reduce noise and protect against scratching
  • 35 shots for J-Hooks and Safety Spotter
  • Wall thickness of steel pipe: 25mm
  • Complete powder coating as corrosion and scratch protection
  • Pull-up bar with diagonal and horizontal handle options and three grip sizes (100, 60 & 35 mm)
  • Weight intakes suitable for weight plates with an inner diameter of 31 mm
  • max. weight-loading J-Hooks: 850 kg
  • max. weight-loading Safety Spotter: 720 kg
Scope of delivery:
  • 1 x device
  • 1 x English user manual (other languages: German, Italian, French, Spanish)
Dimensions:
  • Dimensions: 121 x 210 x 107 cm (WxHxD)
  • Weight: 55 kg
  • Size Maintube: 60 x 60 x 2 mm (W x L x Diameter of the material)
  • Lenght Safety Spotter: 45 cm
Customer opinions
From 12 Customer
10
2

Customer reviews from other countries

From Maciej Rated at 04.03.2024
Tested review

Mega solidne wykonanie, jestem naprawdę bardzo zadowolony i nie spodziewałem się aż tak świetnego wykonania.
Polecam każdemu kto rozważa zakup.
Jest mega stabilny. Jakby ktoś miał wątpliwości co do wymiarów to parametr 120cm dotyczy szerokości bramy.

Super solid workmanship, I am really very satisfied and I did not expect such great workmanship. I recommend it to anyone considering purchasing it. It's super stable. If anyone had any doubts about the dimensions, the parameter 120cm refers to the width of the gate.

From Maciej Rated at 04.03.2024
Tested review

Mega solidne wykonanie, jestem naprawdę bardzo zadowolony i nie spodziewałem się aż tak świetnego wykonania.
Polecam każdemu kto rozważa zakup.
Jest mega stabilny. Jakby ktoś miał wątpliwości co do wymiarów to parametr 120cm dotyczy szerokości bramy.

Super solid workmanship, I am really very satisfied and I did not expect such great workmanship. I recommend it to anyone considering purchasing it. It's super stable. If anyone had any doubts about the dimensions, the parameter 120cm refers to the width of the gate.

From Amazon-Benutzer Rated at 06.08.2022
Tested review

I can say it does its job. Not for serious bodybuilders as it cannot hold extreme weight. For the average user its perfect

I can say it does its job. Not for serious bodybuilders as it cannot hold extreme weight. For the average user its perfect

From Amazon-Benutzer Rated at 11.07.2020
Tested review

Sehr stabiles Rack. Die Lieferung kam sehr schnell über eine Hermes Spedition innerhalb von 5 tagen. Ich trainiere mit einer olympischen standard Langhantel die von den maßen perfekt reinpasst. Bei 110 kilo kniebeuge kann man die stange ohne problem ins Rack reinhauen ohne das alles wackelt. Einfach ein super Teil was auch noch sehr sehr günstig ist. Die lochungen bieten auch genügend einstell möglichkeiten für alle Übungen.

Very stable rack. The delivery came very quickly via a Hermes forwarding agency within 5 days. I train with a standard Olympic barbell, which fits perfectly in terms of dimensions. With a squat of 110 kilos, you can easily hammer the bar into the rack and it won't wobble. Simply a super part which is also very very cheap. The perforations also offer enough adjustment options for all exercises.

From Amazon-Benutzer Rated at 22.03.2020
Tested review

mega geiles ding

super cool thing

From Amazon-Benutzer Rated at 08.12.2019
Tested review

Bin sehr zufrieden, gutes Qualität.

I'm very satisfied, good quality.

From Amazon-Benutzer Rated at 24.09.2019
Tested review

Das Rack wurde in zwei ramponierten Kartons geliefert, von denen einer an einer Ecke aufgeschrammt war, was sich auch in einer Lackschramme des dort befindlichen Teils niederschlug. Angesichts des doch hohen Gewichts der in den Kartons befindlichen Teile wäre eine bessere Verpackung zielführend gewesen. Alle Teile waren jeweils noch mal in Plastikbeutel eingewickelt, was ich vollkommen überflüssig bzw. umweltschädlich finde - erstens verhindern ein paar Mikrometer Plastik kein gegenseitiges Verkratzen (notfalls hätte es hier auch Papier getan), zweitens war so unnötige Arbeit und Entsorgung für mich dabei. Und einige Lackschäden hatten die Teile trotzdem, die m.E. nicht aus dem Versandprozess stammen können. Die Schrauben und Muttern waren in ein Blister eingeschweißt, welches aber bereits kaputt ankam, so dass einige Unterlegscheiben im Karton umhergeisterten. Die Schrauben in ihren Blistern hatten auch keine Typenbezeichnung, so dass erst durch intensives Studium der "Aufbauanleitung" (hierzu gleich mehr) sowie eigenhändiges Nachmessen (80 oder 85mm lang?) klar wurde, welche Schraube wohin gehört. Die Aufbauanleitung - ist ein Explosionsdiagramm. Für welche Verbindung hier zum Beispiel die dicken 80mm-Schrauben und für welche die 85mm-Schrauben verwendet werden, erschließt sich durch Logik, aber nicht durch das Diagramm. Hierzu also mein Fazit: Klimmzuggriffe an obere Querstrebe montieren - hier werden die dünnen Schrauben verwendet, dann hat man die aus den Füßen und verwechselt sie nicht beim restlichen Bau. Für diese braucht man zwei 17er-Schlüssel, einen zum Schrauben und einen zum Gegenhalten. Danach unten anfangen - Fußteile mit Querstrebe verbinden. Hierzu die dicken 80mm-Schrauben (natürlich mit Unterlegscheiben und Muttern) verwenden. Für diese braucht man zwei 19er-Schlüssel. Danach die beiden Gehrungsstreben (die mit der Hantelhalterung) auf die Fußteile stecken - hierzu die dicken 85mm-Schrauben nutzen - aber noch nicht komplett festziehen. Dann die Langstreben anbringen (ebenfalls 85mm-Schrauben) und fest anziehen, und dann die Passung der Gehrungsstreben überprüfen - da musste ich auf einer Seite ganz schön rütteln und zerren, um die Bohrungen überein zu bringen. Beim Verschrauben der Gehrungsstreben mit den Längsstreben kommen übrigens die zwei Schrauben ohne mitgelieferte Mutter zum Einsatz, da in jeweils dem unteren Loch der Gehrungsstrebe die Gegenmutter bereits verschweißt ist. Auch das kann man aus der Explosionszeichnung zwar mit etwas Logik herauslesen, aber explizit steht es dort nicht. Zuletzt die obere Querstrebe/Klimmzugstange anbringen. Das geht mit etwas Geschick auch alleine, wenn man die Stange auf der Schulter balancieren kann (sprich mit Leiter o.Ä. und nicht über Kopf arbeitet). Ansonsten besser zu zweit! Auch hierfür werden die "kurzen" 80mm-Schrauben verwendet, wie auch bei der Verbindung der Querstreben mit den Langstreben. Wenn alles steht, Rechtwinkligkeit überprüfen, dann Schrauben noch mal festziehen. Ich schließe mich der bereits geschilderten Meinung an, dass die Hantelscheiben-Aufnahmen ruhig hätten dünner sein können (30mm mit einem Adapter für 50mm), um mehr Kunden zufriedenstellen zu können. Für mich sind sie nicht nutzbar. Das Gerät selbst ist gut verarbeitet - zum "sehr gut" fehlen noch ein paar Punkte. Die Gummiaufnahmen der Sicherheitsarme sind beispielsweise an den Schnittkanten ausgefranst - da hat wohl jemand mit einem zu stumpfen Messer geschnitten. Ein paar Schweißnähte an den J-Hooks sind minimal deplaziert; nicht so sehr, dass es die Sicherheit beeinflusst, nur die Optik - aber Optik ist eben auch ein Kriterium, wenn auch ein kleineres. Das ist alles tolerabel, da es die Funktion nicht beeinträchtig - führt aber eben zu Abzügen in der B-Note, wie auch die dürftige "Aufbauanleitung" und die nicht ausreichende und zu Plastik-lastige Versandverpackung. Angesichts des günstigen Preises und des dafür gelieferten funktionalen, stabilen und insgesamt ordentlichen Produkts gibt es 4 von 5 Sternen. Ich freue mich, dass es ein Gerät gibt, welches in meinen beengten Räumlichkeiten nicht so viel Platz wegnimmt wie ein Full Rack und was dennoch viele gute Funktionalitäten mitbringt, UND was keine wackelige, dünnwandige Pseudo-Angelegenheit ist. Kurz zu mir, um das Ganze einordnen zu können: weiblich, 40, 178cm/90kg, handwerklich hinreichend geschickt aber keine Mechatronikerin o.Ä. ;), arbeite mit Gewichten für die Fitness und gegen die Rücken-, Nacken-, Schulterschmerzen.

The rack came in two battered boxes, one of which had a scrape on one corner, which also resulted in a paint scuff on the part there. In view of the high weight of the parts in the boxes, better packaging would have been expedient. All parts were wrapped in plastic bags, which I find completely unnecessary and harmful to the environment - firstly, a few micrometers of plastic do not prevent mutual scratching (if necessary, paper would have done the trick), secondly, there was unnecessary work and disposal for me. And the parts still had some paint damage, which in my opinion cannot come from the shipping process. The screws and nuts were sealed in a blister, which arrived already broken, so that some washers were found in the box. The screws in their blisters also had no type designation, so that only after intensive study of the "assembly instructions" (more on this in a moment) and by measuring them yourself (80 or 85mm long?) did it become clear which screw went where. The assembly instructions - is an exploded diagram. For example, for which connection the thick 80mm screws are used and for which the 85mm screws are used is revealed by logic, but not by the diagram. So here's my conclusion: Mount the pull-up handles on the upper crossbar - the thin screws are used here, then you have them out of your feet and don't mix them up with the rest of the construction. For this you need two size 17 keys, one for screwing and one for holding. Then start at the bottom - connect the foot parts with the cross brace. Use the thick 80mm screws (of course with washers and nuts) for this. You need two size 19 keys for this. Then put the two miter struts (the one with the dumbbell holder) on the foot parts - use the thick 85mm screws for this - but do not tighten them completely yet. Then attach the long braces (also 85mm screws) and tighten, and then check the fit of the miter braces - I had to wiggle and yank quite a bit on one side to get the holes to line up. Incidentally, when screwing the miter struts to the longitudinal struts, the two screws without the supplied nut are used, since the counter nut is already welded in the lower hole of the miter strut. You can also read that from the exploded view with a bit of logic, but it is not explicitly stated there. Finally, attach the upper cross brace/pull-up bar. With a bit of skill, you can do this on your own if you can balance the pole on your shoulder (i.e. with a ladder or similar and don’t work overhead). Otherwise better for two! The "short" 80mm screws are also used for this, as well as for the connection of the cross braces with the long braces. When everything is in place, check the squareness, then tighten the screws again. I agree with the opinion already expressed that the weight plate holders could have been thinner (30mm with an adapter for 50mm) in order to be able to satisfy more customers. For me they are not usable. The device itself is well made - a few points are still missing for "very good". The rubber mounts of the safety arms, for example, are frayed at the cutting edges - someone probably cut them with a knife that was too blunt. A few welds on the J-hooks are minimally misplaced; not so much that it affects safety, just the optics - but optics is also a criterion, albeit a smaller one. All this is tolerable, since it does not impair the function - but leads to deductions in the B grade, as well as the poor "assembly instructions" and the insufficient and too plastic-heavy shipping packaging. Given the low price and the functional, stable and overall decent product that came with it, it gets 4 out of 5 stars. I'm happy that there is a device that doesn't take up as much space in my cramped space as a full rack and that still has a lot of good functionalities AND that isn't a wobbly, thin-walled pseudo affair. Briefly about me, to be able to classify the whole thing: female, 40, 178cm/90kg, technically skilled enough but not a mechatronics technician or similar ;), work with weights for fitness and against back, neck and shoulder pain.

From Amazon-Benutzer Rated at 02.06.2019
Tested review

Macht was es soll .. Stabil

Does what it should.. Stable

From Amazon-Benutzer Rated at 09.03.2018
Tested review

Am Montag bestellt und am Freitag wurde es schon per Spedition geliefert. Der Aufbau war alleine auch für ungeschickte Hände relativ einfach. Nur sollte man nicht den Fehler machen, die obere querstrebe an die Seitenteile zu schrauben bevor diese nicht unten an dem Bodenstück befestigt sind. Zu zweit sicher kein Problem, alleine etwas tricky. Jedes Teil des Racks fühlt sich massiv, schwer und wertig an. Wenn es aufgebaut ist, steht es bombenfest, nichts wackelt oder knarzt. Die Klimmzugstangen halten 115kg spielerisch aus und die J-Hooks wie auch die Safety Bars machen schwere Kniebeugen endlich gefahrlos möglich. Die große Auswahl an Höhenverstellungen ermöglicht Block Pulls und Pin Squats, sowie schweres Schulterdrücken in Verbindung mit einer Hantelbank. Dieses Half Rack kann ich uneingeschränkt jedem empfehlen, der zuhause sicher und schwer trainieren möchte.

Ordered on Monday and it was delivered by courier on Friday. The construction was relatively easy even for clumsy hands. But you shouldn't make the mistake of screwing the upper cross brace to the side parts before they are attached to the bottom part. No problem for two, a bit tricky alone. Every part of the rack feels solid, heavy and valuable. When it's set up, it's rock solid, nothing wobbles or creaks. The pull-up bars easily withstand 115kg and the J-hooks as well as the safety bars finally make it possible to do heavy squats safely. The large range of height adjustments enables block pulls and pin squats, as well as heavy shoulder presses in connection with a weight bench. I can unreservedly recommend this half rack to anyone who wants to train safely and heavily at home.

From Amazon-Benutzer Rated at 28.05.2017
Tested review

Ich habe mir nach einiger Zeit an recherche dieses Half Rack zugelegt. Anfangs war ich etwas skeptisch, weil das komplette Rack schräg steht. Aber nach nun einigen Wochen training weiß ich das es sehr Stabil ist und super für das Heim training ausgelegt ist. Als Tip möchte ich nur mit auf den Weg geben, dass man sich vorher genau überlegen sollte wo man die Hantelscheiben Halter montieren möchte. Die Halten lassen sich nicht im aufgebauten Zusatnd unten an den Dreiecken montieren. Ich habe aus diesem Grund das Rack zwei Mal aufgebaut. Wenn jemand sich für eine Passende Langhantel interessiert, die mit diesem Rack genutzt werden kann: POWER-EXTREME Langhantelstange 180 cm inklusive Verschlüsse Fazit: - Top Preis Leistung - Sehr Stabil - Leichte Montage - Platz sparend

After some time of research I bought this half rack. At first I was a bit skeptical because the entire rack is at an angle. But after a few weeks of training, I know that it is very stable and is great for home training. As a tip, I would like to give you a tip that you should think carefully about where you want to mount the weight plate holder. The holds cannot be mounted at the bottom of the triangles when assembled. For this reason I set up the rack twice. If someone is interested in a suitable barbell that can be used with this rack: POWER-EXTREME barbell bar 180 cm including fasteners Conclusion: - top price performance - very stable - easy assembly - space-saving

From Amazon-Benutzer Rated at 18.03.2017
Tested review

Ich habe das Half Rack seit Kurzem in Verwendung und schreibe nun meine erste Rezension, die bei Bedarf aktualisiert wird. Ich fange gleich beim Aufbau an - der ist kinderleicht, vorausgesetzt man hat - anders als ich - selbstsichernde Muttern schon einmal gesehen. Als dann aber klar war dass ich die Dinger einfach fest anziehen muss wie eine normale Mutter ohne Plastiksicherung ging der Aufbau ganz flott. Wichtig: passende 19mm bzw. 17mm Schraubenschlüssel werden gebraucht! Aufgebaut steht das Teil bis jetzt bombenfest, auch bei meinen (75kg) Klimmzügen. Die Halterungen für die 50mm Hantelscheiben sind auch sehr praktisch. Das größte Problem, das ich mit dem Rack habe, ist auch auf meinem Mist gewachsen. Ich habe aufgrund von Platzmangel eine 180cm Langhantelstange gekauft, die mit Ihrem Innenmaß von 110cm NICHT auf die Safety Spotter oder J-Hooks passt. Sie liegt dann auf der "Trennscheibe" zwischen Scheibenaufnahme und Grifffläche - hoffentlich könnt ihr aus meinen Fehlern lernen. Nachdem dies aber ein Fehler meinerseits war und das Half Rack ansonsten einwandfrei performt, hat das Ding auch volle 5 Sterne verdient.

I've been using the Half Rack for a short time and am now writing my first review which will be updated as necessary. I'll start right away with assembly - it's child's play, provided you've seen self-locking nuts before - unlike me. But when it became clear that I just had to tighten things up like a normal nut without a plastic lock, assembly went very quickly. Important: suitable 19mm or 17mm wrenches are required! Once assembled, the part is rock-solid, even with my (75kg) pull-ups. The holders for the 50mm weight plates are also very practical. The biggest problem I have with the rack also grew on my crap. Due to lack of space, I bought a 180cm barbell bar, which with its inner dimension of 110cm does NOT fit on the Safety Spotter or J-Hooks. It then lies on the "separating disc" between the disc mount and the gripping surface - I hope you can learn from my mistakes. But since this was a mistake on my part and the half rack otherwise performed perfectly, the thing deserved a full 5 stars.

From Amazon-Benutzer Rated at 07.03.2017
Tested review

Für das Training in meinem Fitnessraum, suchte ich ein Rack zum Bankdrücken, für Kniebeugen und für Klimmzüge. Außerdem musste es meinem begrenzten Platzangebot genügen (vor allem der geringen Raumhöhe). Dieses Rack hat alle meine Erwartungen soweit erfüllt. Es ist ausreichend stabil, gerade so hoch, dass es in dem nur 2,2 m hohen Raum passt und gerade noch so breit, dass ich mit einer Körpergröße von 1,92 m damit Trainieren kann. Ich verwende es mit einer 2m langen Langhantelstange mit 30mm Aufnahme. Leider kann ich dadurch die schrägen Hantelhalterungen an der Rückseite nicht nutzen, da diese nur für 50mm Scheiben ausgelegt sind. Das finde ich etwas Schade - hier hätte man auch 30mm Stäbe montieren können und einen 50mm Adapter zum darüberstülpen beilegen können. Sehr positiv finde ich die freie Verstellmöglichkeit der Safety Spotter. Somit kann ich für jede Übung deren Position optimal wählen. Sie sind auch mit 45cm ausreichend lange, um bei allen Übungen eine gute Sicherheit bieten zu können. Die 4 frei platzierbaren Gewichtsaufnahmen verwende ich nicht, da ich laufend die J-Hooks und die Safety Spotter für die verschiedenen Übungen umstecke und somit die Löcher benötige. Aufgrund der vielen Löchern ist es gar nicht so leicht, auf Anhieb auf beiden Seiten die richtige Höhe beim Einstecken der J-Hooks bzw. Safety Spotter zu finden (es ist bei den Übungen angenehmer, wenn die Stange waagrecht liegt :) ). Ich habe mir daher bei jedem dritten Loch ein Nummernetikett auf die Innenseite geklebt - damit findet man das richtige Loch viel leichter.

For training in my gym, I was looking for a rack for bench press, squats and pull-ups. In addition, it had to satisfy my limited space (especially the low ceiling height). This rack has met all my expectations so far. It is stable enough, just high enough to fit in the room that is only 2.2 m high and just wide enough for me, who is 1.92 m tall, to train with it. I use it with a 2m long barbell with a 30mm socket. Unfortunately, I can't use the slanted dumbbell holders on the back because they are only designed for 50mm discs. I think that's a bit of a shame - you could have mounted 30mm rods here and included a 50mm adapter to put them on. I find the free adjustment option of the Safety Spotter very positive. So I can choose the optimal position for each exercise. At 45 cm, they are long enough to offer good security for all exercises. I don't use the 4 weight holders that can be placed anywhere, because I constantly reposition the J-hooks and the safety spotter for the various exercises and therefore need the holes. Due to the many holes, it is not so easy to find the right height when inserting the J-Hooks or Safety Spotter on both sides (it is more comfortable during the exercises if the bar is horizontal :) ). That's why I stuck a number label on the inside of every third hole - this makes it much easier to find the right hole.

Show more customer reviews
Customer opinions
Racktor Half Rack
  • Massive construction made of steel square tube
  • Two adjustable J-Hooks & Safety Spotter
  • Four individually placeable weight intakes, including clamping spring
679,99 € 369,99 €
incl. VAT
Log in
Please enter your email address here.
Enter at least 6 or more characters
Top seller
Log in
Please enter your email address here.
Enter at least 6 or more characters
Log in
Please enter your email address here.
Enter at least 6 or more characters