Item number: 60001215

auna BP-002 Boompole Microphone Boom Pole & auna MRS-01 Measurement Microphone Electret

With the microphone boom and measurement microphone set from auna, get the most out of your recordings.

With the microphone boom and measurement microphone set from auna, get the most out of your recordings.

The electret condenser microphone stands out with its excellent linear frequency characteristics, and can be used for the analysis of room acoustics, the calibration of audio systems or for special recordings. Particularly detailed measurements are possible via the 1/4” (6mm) condenser capsule. Together with an omnidirectional polar pattern, the high-quality circuits ensure a particularly low noise signal conversion and make the auna MRS-01 insensitive to high sound levels.

The measuring microphone is supplied in a sturdy plastic case, in which it can be safely stored and transported to every application. Also included are a microphone spider with 1/2” thread and a windscreen.

The professional microphone boom from auna will assist you with the correct recording of the sound.

The construction out of light aluminium tube can extend two-fold and is thus variable between 84-220cm. A built-in cable duct allows cables with a maximum diameter of 0.6mm² to move inconspicuously with kink protection. The ergonomic padding ensures comfort - ideal for longer interviews or press conferences.

Thanks to the padded shoulder bag, transport of the boom pole is particularly easy and secure.

Product details

Highlights

Top features auna MRS-01 Measuring Electret Condenser Microphone

  • Measurement microphone to analyse room acoustics, calibrate PA systems or sound recordings
  • Electret condenser microphone with 1/4" condenser capsule
  • Particularly linear frequency response
  • Includes a sturdy case, microphone spider and windscreen

Top features auna BP-002 Boompole Microphone Boom Pole

  • Professional microphone boom with 84-220 cm length
  • Built-in cable routing
  • Ergonomic padding for great comfort  while holding
  • Ultralight aluminium tube construction
  • Incl. padded shoulder bag and 5/8" thread adapter

Included

  • 1 x Auna MRS-01 Measurement Electret Condenser Microphone Suitcase Spider Mount
  • 1 x

Dimensions

Dimensions auna MRS-01 Measuring Electret Condenser Microphone

  • Dimensions microphone: 19 x 2 cm (LxØ)
  • Dimensions microphone spider: about 4.5 x 8.5 x 5 cm (WxHxD)
  • Dimensions case: about 23.5 x 18.5 x 4.6 cm (WxHxD)
  • Weight microphone: 80 g
  • Weight microphone spider: about 60 g
  • Weight complete case: about 410 g

Dimensions auna BP-002 Boompole Microphone Boom Pole

  • Diameter: 3.5 cm
  • Weight: about 620 g

Features

Properties auna MRS-01 Measuring Electret Condenser Microphone

  • Connections: 1 x XLR mic output
  • Pickup pattern: Omni 
  • Frequency response: 50Hz - 16kHz
  • Sensitivity: -43dBv / Pa (7,1mV)
  • Output impedance: 200 Ω
  • Minimum connection impedance: 1000 Ohm
  • S / N Ratio: 75dB
  • Output noise: 19dB
  • Max. SPL: 149dB SPL
  • Dynamics: 130dB
  • Microphone spider with 1/2" thread
  • Requires 48V phantom power

Properties auna BP-002 Boompole Microphone Boom Pole

  • Thread: 3/8"
  • Cable shaft: max. 0.6 mm²
  • Removable end piece made of rubber

Operating instructions

What our customers think

Leave the first product review!

Small Image

auna BP-002 Boompole Microphone Boom Pole & auna MRS-01 Measurement Microphone Electret

Highlights
  • For the analysis of room acoustics, to calibrate audio systems or audio recordings
  • Electret condenser microphone with 1/4" condenser capsule
  • Particularly linear frequency response
€184.99 Incl. VAT
You can change your order at any time

Top Sellers