SKY-180 PA Speaker Holder
- 35mm stand fittings for wall installation of PA and stereo speakers with flange fittings.
- 3 positioning levels
- Secure lock at tilting joint
You may change your order at any time.
This Skytec bracket allows you to mount PA speakers of up to 50kg safely onto your wall.
Wall mounted speakers can offer better acoustics and reduce the floor space needed by your sound system. In commercial establishments such as bars, pubs and restaurants, this freed-up space can be more effectively used without sacrificing any of the sound quality.
The speaker brackets can be flexibly adjusted with three positioning levels, letting you create the best sound for any room.
Please note that the speaker bracket is delivered without screws for wall mounting.
Please check before purchasing the wall bracket that your speakers have stand fittings. If the fitting is missing, you can upgrade your speakers with a compatible adaptor.
Top features:
-
35mm stand fittings for wall installation of PA and stereo speakers with flange fittings.
-
3 positioning levels
-
Secure lock at tilting joint
- Material: Steel
- Colour: black
- Maximum load: 50kg
- 1 x Wall bracket
- Please note that the brackets do not come with mounting hardware.
- Height: 19.3" (49cm)
- Distance from flange fitting centre to the wall (at a right-angle): 12" (30.5cm)
- Weight: 2.2 kg
USER_RAITING_OTHER_COUNTRIES
Ich habe manchmal etwas Sorge, wenn eine Lichtanlage oder eine Box bei einer Party oder einem Konzert auf einem Stativ steht. Viel zu leicht rempeln Gäste dann auch schonmal dagegen und es können üble Schäden auftreten. Da ist mir eine Wandhalterung viel lieber. Diese hier ist super einfach an die Wand gedübelt worden und absolut robust. Man kann die Neigung für die Boxen oder die Lichtmaschine noch einstellen und mehr muss man einfach auch nicht haben. Auch für den guten Sound ist es besser, wenn die Box an der Wand hängt - das kann ich aus eigener Erfahrung bestätigen. Für mich hat sich der Kauf absolut gelohnt, die Halterung ist ihr Geld wert. Keine Abzüge in der B-Note!
Sometimes I'm a bit worried when a light system or a speaker is on a tripod at a party or a concert. It is far too easy for guests to bump into it and bad damage can occur. I much prefer a wall mount. This one was super easy to dowell to the wall and is absolutely robust. You can still adjust the inclination for the boxes or the alternator and you simply don't have to have more. It's also better for the good sound if the box is hanging on the wall - I can confirm that from my own experience. For me, the purchase was absolutely worth it, the holder is worth the money. No deductions in the B grade!
Wenn man seine Boxen vernünftig aufbauen will und auch einen Platz hat, wo sie dauerhaft stehen können, dann sollte man sich immer für eine Wandhalterung entscheiden. Das macht sich auch beim Sound bemerkbar und in der Lebensdauer der Box, weil sie nicht dauernd angerempelt werden kann. Diese hier ist eine robuste Alternative und bieten zudem die Möglichkeit, die Neigung der Box in drei Positionen zu verändern. Deshalb hatte ich mir diese Halterung bestellt. Wer genau lesen kann, der weiß, dass man die paar Schrauben zur Befestigung selbst besorgen muss, aber sowas sollte die Werkzeugkiste noch wohl hergeben. Die Halterung kam gut verpackt an, viel Erklärungen brauchte ich nicht dazu, sie dann mit vier etwas längeren Schrauben, damit das auch hält, zu befestigen. Tja und dann muss man nur noch die Box drauf setzen und kann sich dann darauf verlassen, dass die Box auch daran gut hält. Nachteile sehe ich gar keine, daher volle Sternenzahl.
If you want to set up your speakers sensibly and also have a place where they can stand permanently, then you should always opt for a wall bracket. This is also noticeable in the sound and in the lifespan of the box, because it cannot be constantly bumped into. This one is a robust alternative and also offers the possibility to change the inclination of the box in three positions. That's why I ordered this mount. If you can read carefully, you know that you have to get the few screws for attachment yourself, but the tool box should probably still have something like that. The bracket arrived well packaged, I didn't need a lot of explanations, then I attached it with four slightly longer screws so that it held up. Well, then you just have to put the box on top and you can be sure that the box will hold on well. I don't see any disadvantages, therefore full stars.
Dieses Produckt is ideal vür Hobby Dj' s es ist ein super preis und leistungs ferhältniss und super Qualität.
This product is ideal for hobby Dj' s it is a great price and performance ratio and great quality.
- 35mm stand fittings for wall installation of PA and stereo speakers with flange fittings.
- 3 positioning levels
- Secure lock at tilting joint
Save with our sets:
You may change your order at any time.
You may change your order at any time.
You may change your order at any time.
You may change your order at any time.
You may change your order at any time.
You may change your order at any time.
Die Halter sind gut verarbeitet (keine scharfen Kanten oder Grate) und gut lackiert. Die Halter sind stabil genug und nicht "labberig". Einzig das Sicherungsseil könnte etwas länger sein. Daher habe ich einen Stern abgezogen. Dies muss aber jeder für sich selbst entscheiden.
The holders are well finished (no sharp edges or burrs) and well painted. The holders are stable enough and not "loose". Only the safety rope could be a bit longer. Hence I deducted a star. But everyone has to decide this for themselves.