3 Some LED Light Effect Set
- LED Moonflower Set of 3 x 57 RGBW-LED s and T-Bar
- Lamp holder tilts and rotates for optimal illumination
- Automatic mode and music control mode via built-in microphone
The Beamz 3 Some Light Effect Set transforms dreary rooms into pulsating dance floors. Thanks to its beginner-friendly Plug & Play usability as well as its thoughtful product design, this LED set is perfect for creating an atmosphere to go along with your music. The sound control operates via the built-in microphone, and the automatic mode easily produces a wide variety of light projections with minimal effort or know-how. The set has three lightweight LED moonflower light effects with 3 x 57 LEDs in the RGBW colour spectrum and a robust T-bar metal for suspended installation. All light effects can be separated from each other to rotate, tilt, and make optimum illumination. The T-Bar may also be mounted on a tripod. Due to the low power consumption, long life of the LEDs and ease of use, the Beamz 3 Some LED Light Effect Set is an ideal solution for creating lighting effects at parties and karaoke events in small bars and clubs or at family celebrations. The set includes a reliable stand-wall mount for wall mounting with flange insert and 3-step adjustable angle.
3 Some LED Light Effect 3-piece Set
Product number: 10022855
Included quantity: 1
Top features:
- Three LED Moonflower Set of 3 x 57 RGBW-LEDs and T-Bar
- Rotating and tilting the lamp holder for optimal illumination
- Automatic mode and music control via built-in microphone
- Easy set-up and use
- Possibility for tripod mounting
Properties:
- Material: plastic, metal
- Colour: Black
- Adjustable sensitivity
- High durability
- Low heat
- Low power consumption
- Fuse
- Power supply: AC 220-240V, 50/60Hz
Dimensions:
- 61 x 32.5 x 9.5cm (WxHxD)
- Weight: 2.7kg
Wall Mounting Speaker Bracket holder - 50kg Load
Product number: 10004468
Included quantity: 1
Top features:
- 35mm stand fittings for wall installation of PA and stereo speakers with flange fittings.
- 3 positioning levels
- Secure lock at tilting joint
Properties:
- Material: Steel
- Colour: black
- Maximum load: 50kg
Dimensions:
- Height: 19.3" (49cm)
- Distance from flange fitting centre to the wall (at a right-angle): 12" (30.5cm)
- Weight: 2.2 kg
USER_RAITING_OTHER_COUNTRIES
- LED Moonflower Set of 3 x 57 RGBW-LED s and T-Bar
- Lamp holder tilts and rotates for optimal illumination
- Automatic mode and music control mode via built-in microphone
Der Beamz 3 Some ist ein toller Lichteffekt, der nicht nur schöne Lichtbilder erzeugt, sondern auch noch einfach zu handhaben ist. Hier sind drei RGBW LED Spots fertig verkabelt und sofort einsatzbereit (plug and play) an einer T-bar befestigt. Die Spots sind einzeln zu drehen und zu neigen, somit kann der Lichteffekt jederzeit verstellt und den Bedürfnissen und Gegebenheiten angepasst werden. Die T-bar hat zwei Haltepunkte mit Feststellschrauben um entweder auf der mitgelieferten Wandhalterung oder einem Licht- bzw. Boxenstativ montiert zu werden. Die Wandhalterung, die gut aussieht und stabil wirkt, habe ich bisher nicht verwendet, da ich den Beamz 3 Some direkt auf einem Lichtstativ montiert habe. Vom Aufbau her kann man den Effekt mit seiner T-bar waagerecht auf dem Stativ montieren oder senkrecht z.B. an der T-bar des (wie in meinem Falle) vorhandenen Lichtstativs. Ich habe den Beamz 3 Some an einem Lichtstativ befestigt, an dem 4 LED spots auf einer T-bar hängen. Die Montage war einfach, die T-bar mit den 4 spots vom Stativ hochheben, den Beamz 3 Some quasi über das Stativ stülpen, T-bar mit spots wieder aufsetzen, Feststellschraube des Beamz anziehen, fertig. Der Lichteffekt kann im Auto Modus oder Musik Modus (Einstellungen rückseitig) betrieben werden. Dabei werden bunte, farblich wechselnde Lichtpunkte und -kreise formschön ineinander gemischt und bewegt/rotiert, bei guter Ausleuchtung. Ich nutze den Beamz 3 Some im Modus "musikgesteuert" als Unterstützung an meinem Lichtstativ und bin damit sehr zufrieden. Der Lichteffekt ist auch super geeignet um z.B. die Fläche vor dem DJ Pult von oben zu beleuchten oder auch das DJ setup direkt. Ein toller Effekt!
The Beamz 3 Some is a great light effect that not only creates beautiful light images, but is also easy to use. Here are three RGBW LED spots fully wired and ready to use (plug and play) attached to a T-bar. The spots can be rotated and tilted individually, so the light effect can be adjusted at any time and adapted to the needs and circumstances. The T-bar has two mounting points with locking screws to be mounted either on the supplied wall bracket or on a light or speaker stand. I haven't used the wall mount yet, which looks good and feels sturdy, as I mounted the Beamz 3 Some directly onto a light stand. In terms of structure, you can mount the effect with its T-bar horizontally on the tripod or vertically, for example on the T-bar of the (as in my case) existing light stand. I attached the Beamz 3 Some to a light stand with 4 LED spots hanging on a T-bar. Assembly was easy, lift the T-bar with the 4 spots off the tripod, put the Beamz 3 Some over the tripod, put the T-bar with spots back on, tighten the Beamz locking screw, done. The light effect can be operated in auto mode or music mode (settings on the back). Colourful, colour-changing points of light and circles of light are elegantly mixed and moved/rotated, with good lighting. I use the Beamz 3 Some in "music controlled" mode as a support on my light stand and am very satisfied with it. The light effect is also great for illuminating the area in front of the DJ desk from above, for example, or the DJ setup directly. A great effect!