Partybar 2 Complete Lighting System
- Impressive effects: powerful RGBW party bar with 2 PARs and 2 derby projectors
- Optional: DMX or standalone operation
- Music-controlled mode: adjustable sensitivity
You may change your order at any time.
The Beamz Partybar 2 is an effective complete lighting system with impressive colour and light effects for every stage and party.
Two PAR spotlights, each with 12 1W RGBW LEDs, and two derby projectors, each with 4 1W RGBW LEDs, provide a comprehensive light show on every dance floor or stage. The sophisticated DMX control of the Partybar 2 allows flexible programming via 3, 6 or 15 channels. In the automatic mode, the speed can be set, and in the music-controlled mode the sensitivity can be adjusted.
The PARs and derby projectors are quickly and easily installed on the supplied tripod and arranged in a row to ensure wide-ranging effects from a perfect height. With the IR remote control, all modes and settings can be easily activated from a distance, making the complete lighting system even more practical for all types of events.
Impressively effective and great on every dance floor: the Partybar 2 by Beamz.
Top features:
-
Impressive effects: powerful RGBW party bar with 2 PARs and 2 derby projectors
-
Optional: DMX or standalone operation
-
Music-controlled mode: adjustable sensitivity
-
Automatic mode: adjustable speed
-
Simple operation: control panel with LED display and remote control
- Max. power: 100 watts
- 12 x 1W RGBW LEDs per spot
- 4 x 1W RGBW LEDs per derby
- 3, 6 or 15 DMX channels
- DMX or standalone mode
- DMX connector: 3-pin XLR
- With height-adjustable tripod
- Includes IR remote control
- Power supply: 100-240 V ~ | 50/60 Hz
- 1 x LED spotlight
- 1 x tripod
- 1 x remote control
- English manual (other languages: German, Dutch, Spanish, French, Polish)
- Dimensions: approx. 73.5 x 17 x 20 cm (WxHxD)
- Weight: approx. 4.4 kg
USER_RAITING_OTHER_COUNTRIES
- Impressive effects: powerful RGBW party bar with 2 PARs and 2 derby projectors
- Optional: DMX or standalone operation
- Music-controlled mode: adjustable sensitivity
Man muss schon ein wenig handwerklich begabt sein dann klappt es mit der Musik Steuerung. Leider schlechte Verarbeitung die Bohrungen sitzen nicht über dem Mikrofon. Ich habe die genaue Position ermittelt etwa 1,3cm nach rechts oben und dort groß aufgebohrt jetzt klappt es. Natürlich muss man die Leiterplatte vorher ausbauen. Leider erlischt dann die Garantie.
You have to be a little handy then it works with the music control. Unfortunately poor workmanship, the holes are not above the microphone. I determined the exact position about 1.3cm to the top right and drilled out a large hole there now it works. Of course you have to remove the circuit board beforehand. Unfortunately, the guarantee then expires.