[B stock] SKY-800 MKII PA Amplifier
- PA amplifier with 800W (2 x 400W) max. output at 4 Ohm (2 x 300W at 8 Ohm or 1 x 800W max. at 8 Ohm – bridged mode)
- Bridgeable – switch between 1 and 2-channel operation
- Various output options via PA connection, jack or screw terminals
The article has been checked for full functionality. We offer a 1-year warranty.
You may change your order at any time.
The Vonyx /Skytec800MKII is a leading PA amplifier with first-class technical aspects and a practical and flexible range of connection options.
For inputs, the PA amplifier features jack and RCA connections for a wide range of different devices. Jack outputs, screw terminals and PA connections link theVonyx /Skytec 800MKII with all types of speaker set-ups. With a simple switch, the system can be changed from stereo mode into bridged mono mode and back again.
The Ground/Lift switch helps to effectively eliminate any ground loops and the system’s 800W power allows a clear and balanced sound, even in peak ranges.
The amplifier is also suitable for mounting in a 19" (48cm) rack case
Please note that the amplifier pictured is the identical Sky-1500MKII model.
Top features:
-
PA amplifier with 800W (2 x 400W) max. output at 4 Ohm (2 x 300W at 8 Ohm or 1 x 800W max. at 8 Ohm – bridged mode)
-
Bridgeable – switch between 1 and 2-channel operation
-
Various output options via PA connection, jack or screw terminals
-
Ground/Lift switch for eliminate ground loops and static
-
Short rise times
-
Suitable for 19" (48cm) rack case – 2U
- Connections: 1 x Stereo RCA Line input, 2 x 6.3mm jack inputs, 1 x PA output (stereo), 1 x Jack output (stereo), 1 x Screw terminal set (Stereo)
- Stereo/Mono switching
- Ground/Lift switching
- Tough metal housing
- Adjustable volume for each channel
- Front handles
- LED indicator for clipping, signal, bridge and fuse
- Front design with illuminated LED logo
- Output impedance: 4 to 8 Ohm
- Signal to noise ratio: >90 dB
- Frequency response: 10Hz to 20kHz (±1.2dB)
- Attenuation factor: >250
- Power supply: 220-240Vac / 50Hz
- 1 x Amplifier
- 1 x Power supply
- User manual (English, German, Spanish)
- 48.2 x 8.8 x 29.5cm (W x H x D)
- Weight: 5.9kg
- Suitable for 19" (48cm) rack case
USER_RAITING_OTHER_COUNTRIES
Leistungsstarke Endstufe aber lauter Lüfter. Bei Zimmerbetrieb störend, wenn's allerdings zur Sache geht ist's egal weil eh zu laut...
Powerful amplifier but loud fan. Disturbing when used in a room, but when it comes down to it, it doesn't matter because it's too loud anyway...
Passt für den Preis eigentlich recht gut. Betreibe damit 2 800 Watt boxen von behringer und der Sound ist erstaunlich gut.
It's actually pretty good for the price. I use it to power two 800 watt Behringer speakers and the sound is amazingly good.
conectandolo en modo puente es lo justo para mi subwofer de 1000w
Connecting it in bridge mode is just enough for my 1000w subwoofer
- PA amplifier with 800W (2 x 400W) max. output at 4 Ohm (2 x 300W at 8 Ohm or 1 x 800W max. at 8 Ohm – bridged mode)
- Bridgeable – switch between 1 and 2-channel operation
- Various output options via PA connection, jack or screw terminals
Für den Preis hat das Gerät eine angemessene Leistung. Das einzige was schon sehr stört ist das extrem laute Lüftergeräusch. Habe es ausgetauscht aber war nicht einfach ein passenden Typ zu finden da Leiselüfter für 24V nicht in allen Ausführungen gibt und auch die Luftleistung nicht weniger sein soll. Ich habe nun 2 x 12V Lüfter eingebaut und in Reihe geschalten. Beide zusammen sind immer noch deutlich leiser als das Original. Der Umbau war sehr aufwendig, hat sich aber gelohnt. Habe allerdings dadurch meine Garantie verloren. Man kann nicht alles haben. Wem der Lärm egal ist kann ich das Teil sehr empfehlen
For the price, the device has adequate performance. The only thing that is really annoying is the extremely loud fan noise. I replaced it but it was not easy to find a suitable type because quiet fans for 24V are not available in all versions and the air output should not be any less. I have now installed 2 x 12V fans and connected them in series. Both together are still significantly quieter than the original. The conversion was very complex but it was worth it. However, I lost my warranty because of it. You can't have everything. If you don't mind the noise, I can highly recommend this part