SKY-2000 MKII PA Amplifier
- PA amplifier with 2000W (2x 1000) max.power at 4 ohms (2 x 750W @ 8 Ohms or 1 x 2000W max at 8 ohms - Bridged mode)
- Bridgeable - capable of 2- and 1- channel operation
- Varied output options via PA connection, jack, or screw terminal
You may change your order at any time.
The Vonyx/Skytec 2000MKII is an efficient PA amplifier with excellent technological capabilities and flexible connection options.
The Vonyx/Skytec2000MKII comes with TRS jack and RCA input connections, while all commercially available speaker setups can be connected via the screw terminals, PA and TRS outputs. Thanks to its bridgeable capability, you can simply flick a switch to transfer from stereo mode to mono mode and back again.
The ground-lift switch helps to prevent ground loop problems.
The Vonyx/Skytec 2000MKII has a maximum power of 2000W
The amplifier can be fitted into a standard sized rack unit of 19" 2U
Top features:
-
PA amplifier with 2000W (2x 1000) max.power at 4 ohms (2 x 750W @ 8 Ohms or 1 x 2000W max at 8 ohms - Bridged mode)
-
Bridgeable - capable of 2- and 1- channel operation
-
Varied output options via PA connection, jack, or screw terminal
-
Ground-lift switch for suppressing ground loop problems
-
Short rise times
-
Suitable for 19" rack (2U)
- Inputs: 1 x stereo RCA line input, 2 x 6.3mm jack input, 1 x PA-output (stereo), 1 x jack output (stereo), 1 x set of screw terminals (stereo)
- Bridgeable: stereo and mono mode
- Ground-lift switch
- Sturdy metal housing
- Adjustable volume for each channel
- Front-fitted handles
- LED indication for clipping, signal, bridging
- Illuminated LED logo at front
- Output Impedance: 4 to 8 ohms
- Signal to noise ratio:> 90 dB
- Frequency response: 10Hz ~ 20kHz (±1.2dB)
- Damping Factor: >250
- Power supply:220-240Vac / 50Hz
- 1 x Amplifier
- 1 x Power cable
- 1 x English user manual (other languages: German, Spanish)
- 19 x 3.5 x 12.4 inches (W x H x D) (48.2 x 8.8 x 29.5cm)
- Weight: approx. 22 pounds (10kg)
- Suitable for 19" rack (2U)
USER_RAITING_NATIVE
USER_RAITING_OTHER_COUNTRIES
la potencia te la dan en wmax seria mejor que que los pusieran rms si algun otro cliente quiere saber que potencia real entrega yo utilizo esta formula que encontre por internet : si queremos saber la potencia real (RMS) de un amplificador, lo mejor es tomar un Multímetro y colocarlo en la escala de voltaje alterno (AC). Luego colocamos a sonar el amplificador en el más alto volumen posible, antes de tener distorsión. Entonces medimos la salida, donde se encuentra conectado el altavoz. El resultado de esta medición lo elevamos al cuadrado y luego lo dividimos por la impedancia del altavoz conectado. A este resultado le restamos el 20% y obtenemos la potencia real del amplificador.A si mas o menos te haces una idea, es importante que no llege distorsion al altavoz.
The power they give you in wmax would be better than them putting them in rms. If any other client wants to know what real power it delivers, I use this formula that I found online: if we want to know the real power (RMS) of an amplifier, it is best to take a Multimeter and place it on the alternating voltage (AC) scale. Then we turn the amplifier on at the highest possible volume, before having distortion. Then we measure the output, where the speaker is connected. We square the result of this measurement and then divide it by the impedance of the connected speaker. From this result we subtract 20% and obtain the real power of the amplifier. If you more or less have an idea, it is important that no distortion reaches the speaker.
imagen no corresponde al producto ,por precio es ideal ,creo en su calidad, pero por ejemplo en mi caso les he solicitado unos datos tecnicos que no reflejan ustedes y para mi eran necesarios, no compremdo como vendiendoestos productos , alguien pudiese haber consultado sinplemente cuanta energia consume en (wats) power consumption,no si funciona a 220volts . esta nota es particular lo demas ideal ,repito
The image does not correspond to the product, for the price it is ideal, I believe in its quality, but for example in my case I have requested some technical data that does not reflect you and for me it was necessary, I do not understand how you are selling these products, someone could have simply consulted how much energy consumed in (watts) power consumption, not if it works at 220volts. This note is particular, the rest is ideal, I repeat
molto potente, ottimo anche il fatto che sia ponticellabile.
very powerful, the fact that it can be bridged is also excellent.
- PA amplifier with 2000W (2x 1000) max.power at 4 ohms (2 x 750W @ 8 Ohms or 1 x 2000W max at 8 ohms - Bridged mode)
- Bridgeable - capable of 2- and 1- channel operation
- Varied output options via PA connection, jack, or screw terminal
This is a all round great amplifier with screw in outputs on the rear as well as speakon outputs which I find very helpful if you want to hook up a tweeter box to! There are many l.e.d's showing the volume and a very sturdy casing! Great buy.