• Professional condenser microphone

• 32mm capsule with gold membranes

• Distinctive cardioid pattern

The Auna CM001 Studio Microphone is a professional condenser microphone.

Thanks to its high sensitivity, low self-noise and a widefrequency response it is ideal for stage performances, as well as instrumentsand vocals.

The Auna professional microphone can even be used as a mediumto create your own podcasts or your own radio and broadcast productions.

The large 32mm gold membrane condenser capsule and thepronounced cardioid provide ideal conditions for studio productions, home recordingsand live recordings.

In addition, the Auna studio mic has an integrated low-cutfilter which can be activated by a switch hidden in the case. The power supplyis customary via 48V phantom power.

The shockmount allows the professional microphone to form abond to the microphone stand with a 5/3'' thread, which may be switched to a5/8'' sized thanks to the supplied adapter.

The robust heavy-duty brass body of the CM001 is not onlyextremely resistant to shocks and scratches; its silver coloration gives theAuna CM001 a timeless style component too. The transport case guarantees that therefined body will be protected from damage.

**Please note that all of our condenser microphones require +48v Phantom Power, which can be supplied from external audio cards, mixing consoles etc. Please check that your equipment is compatible with this item before proceeding with your purchase.* Please note that the microphone is not equipped with a USB port. For direct connection with the computer, we recommend the following item numbers: 10006514, 10006515, 10011703 und 10011711.

• Connection: 1 x XLR output
• Integrated 6dB 100Hz low-cut filter
• Frequency response: 20Hz - 20kHz
• Sensitivity: 36dB + / - 2dB
• Output impedance: 200 ohms
• Noise level: 20 dB
• Max. Gain: 125 dB for 0.5% THD
• Signal to Noise Ratio: 70 dB
• Power supply: via +48V phantom power

• 5 x 15 cm (ØxH)
• Weight: about 340g

• Microphone stand with attachment plus bracket for microphone

• Perfect holding properties (supports up to 1.5 KG)

• Attractively simple design: black arms with silver-coloured screws and clamp

Maybe you just had a melody in your head and want to quickly record it. How easy would it be to get started, right on the window as you’re looking out over the night sky? The foldable, easy-to-use auna Pro ST-1.2 mic stand helps you quickly and easily implement your vision, wherever you want. Everywhere you go: sing your song! Living your dreams can be so easy.

Or do you want to record a podcast? Perhaps together with your friends? In your home or in a studio? Again, the auna Pro ST-1.2 microphone stand proves to be the ideal helper: quickly folded, it fits into any pocket and can be set up in just a few steps in different locations. All it needs is a table edge or shelf. When connected to the auna Pro mic stand, your microphone is in the best hands. “Quiet: recording in progress”, and then you and your friends have everything in place to record a new podcast.

It’s never been so easy to be part of the modern showbiz world! Work like a professional with the auna Pro ST-1.2 microphone stand!

• Optimal for vocal recordings, podcasts, gaming
• Stable positioning by tension springs
• Light weight for a comfortable transport
• Also suitable for mounting lights
• Clamp fastener for mounting on tabletops or shelves

• Dimensions: about 35 x 35 cm (vertical x horizontal)
• Weight: about 500 g

Shipping time: 3 - 5 days

• Black microphone pop shield with 16cm diameter

• Optimal positioning thanks to the 35cm flexible gooseneck

• Wide-meshed nylon cover with 2 layers

The auna Pro POP-1 pop shield reliably protects your hardware and sound recording against unwanted popping sounds which often arise through the articulation of B and P sounds. The use of anti-pop sheilds pays off just in the studio applications. The loss of height in the audio signal is relatively low thanks to the relatively meshed nylon material and has no relevant impact on the quality of the recording as a whole. The microphone pop shield can be directly mounted on the mic stand with a screw and be optimally positioned via the flexible gooseneck.

• Easy attachment to the stand
• High quality acoustic filter
• Ideal protection for hardware and audio signal
• Material: plastic, nylon, metal
• Colour: Black

• Diameter: 16cm
• Length of gooseneck: 35cm
• Weight: about 205g

Shipping time: 3 - 5 days