Studio Microphone Set
You may change your order at any time.
Studio Microphone Set with Microphone, Microphone Boom Arm & Pop Shield Black
3 -part microphone set including microphone, microphone boom arm and pop shield for recording vocals and song in studio quality.
Art.Nr.: PL-6514-11537-11536 / 60001155
This studio microphone set leaves no wish unfulfilled. Along with an auna MIC - 900B condenser microphone, the set includes the microphone ST-1 boom arm and the Pop-1 pop shield from Malone to help you turn the rehearsal room into a recording studio in a flash.
The auna MIC-900B condenser microphone is specifically designed for recording song and speech and has a sample rate of 16 bit/48kHz and a balanced cardioid pattern. It uses a USB cable to connect to a PC or laptop, and is ready to go immediately with Plug & Play.
With the Malone ST - 1 boom arm, the microphone is easily mounted on table tops or stands. The arm has several joints for individual adjustment to any singer or speaker.
Last but not least, the Malone POP-1 pop shield reliably protects your hardware and sound recording against unwanted popping sounds which often arise through the articulation of B and P sounds. The pop shield can be optimally positioned in front of the microphone using the flexible gooseneck.
Set consists of
MIC-900B USB Cardioid Studio Condenser Microphone Black
Item number: 10006514
Included quantity: 1
Top features:
- USB condenser microphone
- Built-in 16mm electret microphone capsule
- Distinctive cardioid polar pattern
- Includes shock mount with ⅝" (16mm) thread for stand mounting, and ⅜" to ⅝" adapter
- Stable, matte-back metal body
- Plug & Play for Windows and Mac computers
Properties:
- Connections: USB Type B connection
- Frequency response: 30Hz-18kHz
- Sample rate: 16 bit / 48 kHz
- Sensitivity: -32dB
- SPL: 136dB
- Green power LED
- Power supply: via USB
Dimensions:
- Microphone: 6.5 x 2 inches (16.5 x Ø 5cm) (length x Ø)
- Shock mount: 3.5 x 3.5 x 3.9 inches (W x H x D) (9 x 9 x 10cm)
- Cable length: approx. 3 metres
- Microphone weight: approx. 0.6 pounds (295g)
- Shock mount weight: approx. 0.4 pounds (200g)
ST-1.2 Microphone Stand Boom Clamp Holder 1.5 kg 35x35 cm Black
Item number: 10030214
Included quantity: 1
Top features:
- Microphone stand with attachment plus bracket for microphone
- Perfect holding properties (supports up to 1.5 KG)
- Attractively simple design: black arms with silver-coloured screws and clamp
- Simple and fast assembly
- Low weight with high load capacity
Properties:
- Optimal for vocal recordings, podcasts, gaming
- Stable positioning by tension springs
- Light weight for a comfortable transport
- Also suitable for mounting lights
- Clamp fastener for mounting on tabletops or shelves
Dimensions:
- Dimensions: about 35 x 35 cm (vertical x horizontal)
- Weight: about 500 g
POP-1 Microphone Pop Shield Wind Screen Pop Guard
Item number: 10011536
Included quantity: 1
Top features:
- Black microphone pop shield with 16cm diameter
- Optimal positioning thanks to the 35cm flexible gooseneck
- Wide-meshed nylon cover with 2 layers
- Suppresses noise arising from the articulation of the B and P sounds
Properties:
- Easy attachment to the stand
- High quality acoustic filter
- Ideal protection for hardware and audio signal
- Material: plastic, nylon, metal
- Colour: Black
Dimensions:
- Diameter: 16cm
- Length of gooseneck: 35cm
- Weight: about 205g
Customer opinions
